The MOTOREX Chainlube with PTFE is a fully synthetic chain lubricant that has excellent dust and dirt repellent properties. This special formulation with PTFE reduces friction and provides optimal lubrication for your chain links. The high-quality additives in this product allow for smooth and precise gear changing. This chain lubricant is primarily intended for racing bikes that are used for short trips in dry conditions. However, mountain bikes can also benefit from using the MOTOREX Chainlube with PTFE if the climate and mileage conditions are similar. To apply this chain lubricant, start by shaking the bottle well. Then, apply the lubricant to the dry chain, both inside and out. Allow it to take effect for a short while before removing any excess oil with a cloth. It is best to apply this product in temperatures above 10°C. For cleaning a dirty chain, you can use the MOTOREX Bike Chain Degreaser. When applying the MOTOREX Chainlube with PTFE, remember the saying, "as little as possible, as much as necessary." Apply a thin layer of the lubricant to the entire length of the chain, both inside and out. Leave it to take effect for a few minutes before removing any excess oil with a cloth. It is recommended to leave the chain to dry overnight, allowing the lubricant to fully take effect. If there is still some oil residue on the chain after a long period of time, it is advised to wipe it down again with a cloth. The MOTOREX Chainlube with PTFE features PTFE, which helps reduce friction. It also has excellent resistance to dirt and dust, leaving a dry and colourless wax film that is not sticky. This product enables precise and smooth gear changing. It is especially suitable for short trips in dry conditions and is perfect for racing.